Extron electronic - 68-1405-01

Below are all the different types of Extron electronic. Select the device of your choice, to download the manual

Contents

AVTrac Rough In Adapter Installation Guide This adapter is designed for installation in new stud wall constructions prior to installing the gypsum board walls dry wall 1 Determine where AVTrac will abut the wall See the I AVTrac Installation Guide part number 68 1405 01 for factors that must be considered before installation Cut out a section of the wall base stud that is 4 10 1 cm wide and align the front edge of the adapter base with the front edge of the wall base stud see the figure at right 2 Mark the position of the holes in the adapter base and drill at least two holes into the Dry Wall 2 Masonry Screws Rough In Adapter Base Front edge is level with wall base stud Wall Base Stud Rough In Adapter Front Suppor ...